Matrix SIMADO GFXD1111S, Системное руководство

Страница: 93 / 194

Matrix SIMADO GFXD1111S V3 System Manual 87
Where,
By default, Network Selection Mode is 1.
Use following command to program Network Operator's Code in priority table:
332-Priority-Code-#*
Where,
Priority is from 1 to 9.
Code = MCC- MNC. It can be of maximum 8 digits.
By default, Network Operator Code is 00000 for Priority 1 to Priority 9.
The default priority table programmed in the system will be as shown below:
Use following command to clear Network Operator Code in priority table:
332-Priority-#*
Use following command for selecting Mobile Frequency Band supported by your network operator:
333-Mobile Frequency Band-#*
Where,
By default, Mobile Frequency Band Selection for GSM will be '900 + 1800' and for CDMA it will be 'Any
CDMA'.
• Frequency Band selection not required if 3G module is installed in SIMADO GFXD1111S.
• In 'Manual' mode, network is not selected as per the field strength but is selected as per the priority
network codes.
• It is recommended to restart the system and wait for proper network signals to use the system after
changing network selection mode i.e. from manual to automatic or from automatic to manual.
Relevant Topics:
1.
“Port Parameters-Mobile” 121
2.
“Signal Strength” 151
Mode Meaning
1 Automatic
2 Manual
Priority Network Operator Code
1 00000
2 00000
3 00000
: :
9 00000
Code Frequency in MHz for GSM Frequency Band for CDMA
1 900 Any CDMA
2 1800 Cellular A or B
3 1900 Cellular A
4 850 + 1900 Cellular B
5 900 + 1800 Any CDMA