manualshive.com logo in svg

Matrix SIMADO GFXD1111S, Системное руководство

Поделиться
Скачать
Matrix SIMADO GFXD1111S Скачать руководство пользователя страница 146

140

Matrix SIMADO GFXD1111S V3 System Manual

2.

In the response window choose the file to be transferred. Ensure that the protocol selected is 'ZModem'. 
Click on Send.

3.

The progress of data transfer is displayed as follows.

Once the data transfer is over the connection can be disconnected and re-established if and when required.

How to program?

Login Code and Login Password are used to invoke the Z-Modem in the SIMADO GFXD1111S while programming 
the system through Mobile Port. The Login Code and the Login Password protect the system from unauthorized 
alterations. 

Use following command to change login name to be used for programming through ZModem:

121-New Login Name-#*

Where,
New Login Name is of 4 digits. Digit 0 to 9, # and * are allowed. '#*' should not be used as part of the name. 

Please note that the system cannot be programmed through Mobile Port with default Login Code and 
Login Password. Default Login Name is 1234 and Default Login Password is 1234.

Use following command to change Login Password to be used for programming through ZModem:

122-New Login Password-#*

Where,
New Login Password is of 4 digits. Digit 0 to 9, # and * are allowed. '#*' should not be used as part of the name.

Please note that following commands are ignored if included in the text file since these commands either 
restart the system or respond back to the user or are for the Service Provider.
•

105-Software Restart.

•

106-Load Default Configuration.

•

108-Change SA Password.

•

109-Software Version Revision Display.

•

111-Enable/Disable SIM PIN checking on power ON.

•

113-Program New SIM PIN.

Содержание SIMADO GFXD1111S



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды