manualshive.com logo in svg

Matrix SIMADO GFXD1111S, Системное руководство

Поделиться
Скачать
Matrix SIMADO GFXD1111S Скачать руководство пользователя страница 9

Matrix SIMADO GFXD1111S V3 System Manual

3

•

Location Information Indication

•

Call Divert

SIMADO GFXD1111S supports 3G module for voice. When 3G module is installed in the system, it will have 
following effect:

1.

Frequency Band Selection not required.

2.

Current calls will be disconnected if Call Waiting Service is not disabled in the SIM Card. Disable Call 
Waiting in SIM Card before inserting it in SIMADO GFXD1111S.

Some of the terms used in this System Manual are defined below:

System Engineers (SE):

 A person who install, configure and maintains SIMADO GFXD1111S.

System Administrator (SA):

 System Administrator is a person who operates the system and performs 

administrative functions. System Administrator is authorized to perform only limited functions such as change 
SA password, display software version-revision, display call duration etc…For example, receptionist or an 
operator in an organization is called System Administrator.

Service Provider:

 Services Provider is an entity that provides telecom services to other entities. For example, 

Reliance, Vodafone etc. are a few service providers that provide telecommunication services to its 
subscribers.

User:

 A person who uses SIMADO GFXD1111S.

Caller/Calling party:

 A person who makes calls. 

Callee/Called party:

 A person to who receives the call.

Using this System Manual, you will be able to install, operate and make optimum use of SIMADO GFXD1111S. In 
case you face any technical difficulties, you are advised to contact our dealers for help. All Matrix dealers are 
properly trained and ready to give you support whenever needed. In addition to this, technical consultation is also 
available from Matrix engineers every business day. For technical consultation from our engineers, you are 
requested to dial our support numbers.

Содержание SIMADO GFXD1111S



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды