Matrix SIMADO GFXD1111S, Системное руководство

Страница: 108 / 194

102 Matrix SIMADO GFXD1111S V3 System Manual
Pulse Rates:
Two types of pulse rates are programmed viz. normal pulse rate and concessional pulse rate. Normal pulse rates
are applicable during normal timings of the day whereas concessional pulse rates are applicable during
concessional timings of the day. Each pair of normal pulse rate and corresponding concessional pulse rate is
identified by a pulse rate type. Total 25 pulse rate types can be programmed in the system. These pulse rate types
can be assigned to an area code/s.
Emergency telephone numbers like that of police, fire, ambulance etc. are not required to be programmed in the
table. When such number is dialed, the system will allow the call to go through and no answer signaling will be
generated during the call.
Use following command to program normal pulse rate for a pulse rate type:
534-Pulse Rate Type-Normal Pulse Rate-#*
Where,
Pulse Rate Type is from 01 to 25.
Normal Pulse Rate is in XXX.XX format.
Pulse rate of 180 should be programmed as 18000 whereas pulse rate of 30 should be programmed as 03000.
By default, Normal Pulse Rates are 000.00.
Example: To program the normal pulse rate as 180.00 at pulse rate type 01, issue command: 534-01-18000-#*.
Similarly, to program the normal pulse rate as 1.5 at pulse rate type 02, issue command: 534-02-00150-#*.
Use following command to program the concessional pulse rate for a pulse rate type:
535-Pulse Rate Type-Concessional Pulse Rate-#*
Where,
Pulse Rate Type is from 01 to 25.
Concessional Pulse Rate is in XXX.XX format.
Pulse rate of 180 should be programmed as 18000 whereas pulse rate of 30 should be programmed as 03000.
By default, Concessional Pulse Rates are 000.00.
Example: To program the normal pulse rate as 180.00 at pulse rate type 01, issue command: 534-01-18000-#*.
Similarly, to program the normal pulse rate as 2.5 at pulse rate type 02, issue command: 534-02-00250-#*.
Use following command to delete an entry from the pulse rate table so formed:
536-Pulse Rate Type-#*
Where,
Pulse Rate Type is from 01 to 25.
Use following command to delete all the entries from the pulse rate table:
536-00-#*
Mapping Area Codes and the Pulse Rate Types:
Use following command to program a pulse rate type for an area code:
532-Area Code Index-Pulse Rate Type-#*
Where,
Area Code Index is from 0001 to 1000.
Pulse Rate Index Normal Pulse Rate Concessional Pulse Rate
P1 80.0 40.0
P2 100.0 80.0
P3 120.0 100.0
: : :
PN NN CN