manualshive.com logo in svg

Matrix SIMADO GFXD1111S, Системное руководство

Поделиться
Скачать
Matrix SIMADO GFXD1111S Скачать руководство пользователя страница 20

14

Matrix SIMADO GFXD1111S V3 System Manual

Connecting SIMADO GFXD1111S

SIMADO GFXD1111S can be used as stand-alone system as well as it can also be interfaced with the PBX. It 
should be installed at the airy, dust free and moisture free place. 

Follow the steps given below to connect GFXD1111:

•

Place SIMADO GFXD1111 at a place where it can get AC power supply and network signals.

•

Connect Antenna provided with the system to the TNC connector, labeled as 'ANT' of GFXD1111.

•

Connect telephone instrument with CLI display to the FXS port of GFXD1111 with the help of RJ11 cable. 
You can also connect FXS port of GFXD1111 to the FXO port of the PBX.

•

Connect PSTN (CO) line to the FXO port of GFXD1111 with the help of RJ11 cable. You can also connect 
FXO port of GFXD1111 to the FXS port of the PBX.

•

Connect a computer to the COM port of GFXD1111 with the help of COM port cable.

•

Insert SIM card/RUIM card of the service provider in the SIM Card Slot of GFXD1111.

•

Connect AC Mains input of GFXD1111 to the AC Mains Socket and power On the system.

Follow the steps given below to connect GFXD1111S:

•

Place SIMADO GFXD1111S at a place near wall Socket and where it can get proper network signals.

•

Connect Antenna provided with the system to the TNC connector, labeled as 'ANT' of GFXD1111S.

•

Connect telephone instrument with CLI display to the FXS port of GFXD1111S with the help of RJ11 cable. 
You can also connect FXS port of GFXD1111S to the FXO port of the PBX.

•

Connect PSTN (CO) line to the FXO port of GFXD1111S with the help of RJ11 cable. You can also connect 
FXO port of GFXD1111S to the FXS port of the PBX.

•

Connect a computer to the COM port of GFXD1111S with the help of Ethernet cable.

•

Insert SIM card/RUIM card of the service provider in the SIM Card Slot of GFXD1111S.

•

Connect Power Socket of GFXD1111S to the DC Jack using 12V DC Power Adaptor provided to you and 
switch ON the power supply.

To protect the SIM card inserted in the system from being mis-used, SE is recommended to change the SIM PIN. 
Please ensure that SIM PIN of the SIM Card and that of the system is same. 

By default, SIM PIN of the system is 

1234.

 To change the SIM PIN, follow the steps given below:

•

Switch Off GFXD1111S.

•

Remove SIM Card and insert the same in the mobile instrument.

•

Enable 'SIM PIN at Power ON' parameter in the SIM Card.

•

Change the SIM PIN of the SIM Card to 1234. (default)

•

Insert SIM Card in GFXD1111S and switch on the system. Change the SIM PIN after GFXD1111S attains 
normal working position.

Содержание SIMADO GFXD1111S



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды