manualshive.com logo in svg

Matrix SIMADO GFXD1111S, Системное руководство

Поделиться
Скачать
Matrix SIMADO GFXD1111S Скачать руководство пользователя страница 69

Matrix SIMADO GFXD1111S V3 System Manual

63

GPRS (General Packet Radio Service)

The General Packet Radio Service (GPRS) is a new value added service that allows information to be sent and 
received across a mobile telephone network. Some important applications of GPRS are Chat, transfer of textual/
visual information, transfer of Still and moving images, Web Browsing, File Transfer etc.
For this application, the system should be configured in Mobile-FXS Mode, which is the default configuration of the 
system. (Refer 

“Mobile-FXO Mode”

 for more details)

This feature is not supported if CDMA Module is installed in the Mobile port.

To surf the Internet using SIMADO GFXD1111S, it should be configured in SMS + In Fax + Data mode. 
GPRS service for the SIM Card used in the system must be enabled by the Service Provider.

•

Set Baud Rate ('SMS + In FAX + Data’) to either '0 (Autobauding)' or '115200' by using command: 

232-Baud Rate-#*

. (Refer 

“Mode of Operation”

 for details)

•

Set up a Modem.

•

Set up the Dial-Up network.

•

Get connected to the New GPRS connection.

•

Use the Internet Explorer or Netscape Navigator to surf the Internet.

How to program?

(Operating System-Windows 2000, Windows XP, Windows NT)

Installing Modem

1.

Click on Start 

 Control Panel.

Содержание SIMADO GFXD1111S



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды