Matrix SIMADO GFXD1111S, Системное руководство

Страница: 124 / 194

118 Matrix SIMADO GFXD1111S V3 System Manual
Only SE can program CLI Type for the FXS Port. SE should program CLI type, depending on the type of telephone
instrument connected to the FXS Port of GFXD1111S.
Use following command to program CLI Type for the FXS Port:
222-CLI Type-#*
Where,
CLI Type is:
By default, CLI Type is 3.
CLI type 'None' is selected when the telephone instrument connected to the FXS port does not have the
LCD to display the number or user does not want to detect the CLI.
Rep by DTMF digits in CLI:
GSM/CDMA network presents calling party number with prefix as '+' to the called party. However, GFXD1111S
eliminates '+' and represent the remaining CLI on the FXS. Now many telephone instruments supports memory
dialing and allows user to call back the number stored in its memory. In this scenario, when user dials the number,
since GFXD1111S has eliminated '+' from the CLI, the call is not processed by the network.
This problem can be solved if '+' is replaced by DTMF digits, generally international dialing prefix, before presenting
it on the CLI of the called party. So that when the same is used for memory dialing it is processed by the network.
GFXD1111S enables SE to program digits that replaces '+' in the calling party's number before presenting it on the
CLI of the called party.
Use following command to program the digits which will replace '+' in the CLI:
301-Number String-#*
Where,
Number string can be of maximum four digits.
By default, Number String programmed is 00.
Use following command to clear the digits programmed:
301-#*
End of Dialing:
End of Dialing is a mechanism by which GFXD1111S detects end of dialing of a number string and then processes
a call further for out-dialing. This feature enables faster out dialing of a number. GFXD1111S detects end of dialing
by dialing a digit i.e. #.
• If # is programmed as end of dialing digit, then system will consider the dialing of # as end of dialing.
• If # is not programmed as end of dialing digit then the system detects end of dialing on its FXS port when
the inter digit wait timer expires.
• If '#' is not programmed as End of Dialing Digit then it can be dialed in the number string for calling GSM/
CDMA number, along with other digits.
Use following command to use # as end of dialing digit:
110-Code-#*
CLI Type Meaning
1 None
2 DTMF (Number, Ring)
3 ITU-T V.23 FSK
4 Bellcore FSK
5 DTMF ('D', 'Number, 'C', Ring)