manualshive.com logo in svg

Matrix SIMADO GFXD1111S, Системное руководство

Поделиться
Скачать
Matrix SIMADO GFXD1111S Скачать руководство пользователя страница 134

128

Matrix SIMADO GFXD1111S V3 System Manual

8.

After the selection of file don't click on 'Send' button. Instead give command 

510-#*

 by phone to invoke 

Zmodem in the SIMADO GFXD1111S. The system responds with the strings as shown in the figure below.

9.

Click 'Send' button before the last i.e. the 20th string is displayed. Else, you will have to issue command 

510-#*

 again.

Please note that following commands are ignored if included in the text file since these commands either 
restart the system or respond back to the user or are for the Service Provider.
•

105-Software Restart.

•

106-Load Default Configuration.

•

108-Change SA Password.

•

109-Software Version Revision Display.

•

113-Program New SIM PIN.

•

114-Register Personal Unlock Key (PUK)

•

121-Program Login Code.

•

122-Program Login Password.

•

202-Enable/Disable CLIR on Mobile Port.

•

203-Enable/Disable Incoming SMS Notification on Mobile Port.

•

205-Enable/Disable Location Information on Mobile Port.

•

231-Choose the Communication Path.

•

251-Set the Date and Time.

•

252-Set the Day.

•

271-Program the Receive Control Gain.

•

272-Program the Transmit Control Gain.

•

510-Invoke Zmodem to download data through COM Port.

•

541-Print Area Codes for Database1 or Database2.

•

542-Print Normal/Concessional Pulse rate.

Содержание SIMADO GFXD1111S



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды