Matrix SIMADO GFXD1111S, Системное руководство

Страница: 98 / 194

92 Matrix SIMADO GFXD1111S V3 System Manual
• User must restart the system to apply baud rate changes.
• User must change the baud rate when the system configuration is changed from SMS mode
to SMS + In FAX + Data mode or the system is restarted.
3. Report Generation
When GFXD1111S operates in this mode, following operations are possible:
•
Programming the System
• Report Generation
• Making outgoing calls through FXO Port
• Receiving incoming calls through FXO Port
• In this mode, only command to change the mode of operation can be issued.
• Reports are generated/seen on the hyper-terminal window. Make sure that the hyper terminal settings
are suitable for report generation.
• When the system is switched on or restarted, the mode of operation does not change.
• The system restarts as soon as the command to change the mode of operation is issued.
How to Program?
Use following command to set communication path:
231-Path Type-#*
Where,
By default, the communication path is set to SMS.
Use following command to set Baud Rate (SMS + In FAX + Data):
232-Baud Rate-#*
Where,
Baud Rate is of two digits.
Range of Baud Rate is 00 to 11.
By default, Baud Rate (SMS + In FAX + Data) is set to '0 (Autobauding)'.
Path Type Meaning
1 SMS (MC + Mobile)
2 SMS + In Fax + Data (PC + Mobile)
3 Report Generation (MC + PC)
Baud Rate Meaning
00 0 (Autobauding)
01 300
02 1200
03 2400
04 4800
05 9600
06 14400
07 19200
08 28800
09 38400
10 57600
11 115200