Matrix SIMADO GFXD1111S, Системное руководство

Страница: 122 / 194

116 Matrix SIMADO GFXD1111S V3 System Manual
Port Parameters-FXS
SE should program various FXS port parameters for smooth and proper functioning of SIMADO GFXD1111S. All
these parameters are described below:
Call Forward:
Call Forward feature enables the user to forward his calls to another destination number when he is unable to
attend the calls at his extension. Call Forward feature is applicable only on FXS Port and GFXD1111S supports only
'Call Forward: When No Reply'.
‘Call Forward- When No Reply’ means incoming calls on FXS Port are forwarded to the programmed destination
number after the Call Forward- No Reply Timer. GFXD1111S can forward calls either to FXO Port or to the Mobile
Port:
• Forward Calls to FXO Port: When there is an incoming call on Mobile Port and if the FXS Port does not
answer the call within FXO Port-No Reply Timer, then the call will be forwarded to the FXO Port using FXO
Port-Destination Number.
• Forward Calls to Mobile Port: When there is an incoming call on FXO Port and if the FXS Port does not
answer the call within Mobile Port-No Reply Timer, then the call will be forwarded to the Mobile Port using
Mobile Port-Destination Number.
• Forward Calls to Mobile Port - Dual Ring: When Dual Ring is enabled and there is an incoming call on
FXO Port and if the FXS Port does not answer the call within Mobile Port-No Reply Timer, then the ring on
the FXS port will not stop and simultaneouly the call will be forwarded to the Mobile Port using Mobile Port-
Destination Number. Answering the call on FXS Port will disconnect the call on Mobile Port and answering
the call on Mobile Port will stopo ringing on the FXS port.
Use following command to set Forward Calls to FXO Port-When No-Reply:
131-Code-#*
Where,
By default, Forward Calls to FXO Port-When No-Reply is disabled.
Use following command to set Forward Calls to FXO Port-Destination Number:
132-Destination Number-#*
Where,
Valid digits are 0 to 9.
Maximum length of the destination number is 16 digits.
By default, Forward Calls to FXO Port-Destination Number is blank.
Use following command to clear the number string of Forward Calls to FXO Port-Destination Number:
132-#*
Use following command to program Forward Calls to FXO Port-No-Reply Timer:
133-No-Reply Timer-#*
Where,
Valid range for FXO Port-No-Reply timer is from 01 to 99 seconds.
By default, Forward Calls to FXO Port-No-Reply Timer is 15 seconds.
Code Meaning
0 Disable
1 Enable