Matrix SIMADO GFXD1111S, Системное руководство

Страница: 39 / 194

Matrix SIMADO GFXD1111S V3 System Manual 33
Call Duration Display
SIMADO GFXD1111S enables you to display, the duration of calls made and received on the FXS Port, on the LCD
of your telephone instrument using call duration display feature. It supports display of call duration of following
types of calls:
• Last Call
• All Received Calls
• All Dialed Calls
• All Calls
How to Program?
Call Duration Display feature can be programmed from SE mode as well as from SA mode.
Use following command to display the duration of desired call type:
610-Call Type-#*
Where,
Call Type is:
Use following command to clear all call-duration display:
610-0-#*
If CLI type set on the FXS port is FSK, the format of call display would be as under:
N HH MM SS
XX DUR:HH:MM:SS
Where,
N = Type of Call
XX represents following:
In case of last call duration display, XX can be either IC (Incoming) or OG (Outgoing) depending on the type of last
call.
DUR = Duration
HH = Hours (Range = 00 to 99)
MM = Minutes (Range = 00 to 59)
SS = Seconds (Range = 00 to 59)
If CLI type set on the FXS port is DTMF, the format of call display would be as under (Only numbers supported):
Call Type Meaning
1 Duration of last dialed/received call
2 Duration of all received calls
3 Duration of all dialed calls
4 Duration of all (dialed and received) calls
XX Meaning
IC Incoming Call
OG Outgoing Call
RC Received Calls
DC Dialed Calls
AC All Calls
N HH MM SS