manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Руководство пользователя, Страница: 85 / 348

Поделиться
Скачать
MARUTI SUZUKI S-Cross Скачать руководство пользователя страница 85

2-66

BEFORE DRIVING

64MS0-74E

Main Beam (high beam) Indicator 
Light

50G056

This indicator comes on when headlight
main beams (high beams) are turned on.

Illumination Indicator Light

64J045

This indicator light comes on while the
position lights, tail light and/or the head-
lights are on.

Glow Plug Indicator Light

60A543

If the coolant temperature is cool enough,
this light comes on when the ignition switch
is turned to the “ON” position or the engine
switch is pressed to change the ignition
mode to “ON” and goes out when the glow
plug is heated enough for engine starting.

Fuel Filter Warning Light

60A541

This light comes on for several seconds
when the ignition switch is turned to the
“ON” position or the engine switch is
pressed to change the ignition mode to
“ON” so you can check that light is work-
ing.
If the light comes on when driving, there is
a possibility to have water in the fuel filter.
Drain water as soon as possible.Have your
vehicle inspected by an authorised Maruti

Suzuki workshop. For details of draining
water, refer to “Fuel Filter” in the “INSPEC-
TION AND MAINTENANCE” section.

Master Warning Indicator Light

78K049

When the ignition switch is turned to “ON”
position or the engine switch is pressed to
change the ignition mode to “ON”, this light
comes on briefly so you can check that the
light is working.

When the information display shows warn-
ing and indicator messages, this indicator
light may also comes on or blink.
For details, refer to “Information Display” in
this section.

Содержание S-Cross





























































































































































































































































































































































Отзывы:

Нет отзывов