manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Руководство пользователя, Страница: 47 / 348

Поделиться
Скачать
MARUTI SUZUKI S-Cross Скачать руководство пользователя страница 47

2-28

BEFORE DRIVING

64MS0-74E

60A039

To unfasten the seat belt, push the button
on the buckle and retract the belt slowly
while attaching a hand to the belt or/and
the latch plate.

Rear Center Seat Belt

Rear center seat belt is the lap belt.
To fasten the belt, pull the latch plate
attached to the seat belt across your hips
and press it straight into the buckle until
you hear a click. To reduce the risk of slid-
ing under the belt during a collision, posi-
tion the belt across your lap as low on your
hips as possible and adjust it to a snug fit.

80JS028

To tighten the belt, pull the free end of the
belt across alongside the lap strap.

80JS029

To lengthen, release the latch plate from
the buckle, pull the latch plate (adjuster) in
the direction of the arrow, at right angles to
the belt. The latch plate should then be
refitted into the buckle and the belt tight-
ened as previously described.
To unfasten the belt, press the release but-
ton on the buckle catch.

80JS031

EXAMPLE

TO TIGHTEN

Low on hips

EXAMPLE

TO LOOSEN

Right angle

EXAMPLE

CENTER

CENTER

CENTER

EXAMPLE

Содержание S-Cross





























































































































































































































































































































































Отзывы:

Нет отзывов