background image

7-2

INSPECTION AND MAINTENANCE

64MS0-74E

Maintenance Schedule

The following table shows the times when
you should perform regular maintenance
on your vehicle. This table shows in kilo-
meters and months when you should per-
form inspections, adjustments, lubrication
and other services.

Periodic Maintenance 
Schedule

“C”: Clean
“R”: Replace or Change
“I”: Inspect, clean, adjust, lubricate or

replace as necessary

“L”: Lubricate

“T”: Tighten to Specified Torque 

“O”: Rotate

NOTE:
This table includes services as scheduled
up to 80,000 km mileage. Beyond 80,000
km, carry out the same services at the
same intervals respectively.

WARNING

MARUTI SUZUKI recommends that
maintenance on your vehicle should
be performed by authorised Maruti
Suzuki workshop.

NOTICE

Whenever it becomes necessary to
replace parts on your vehicle, it is
recommended that you use MARUTI
genuine replacement parts or their
equivalent.

Содержание S-Cross





























































































































































































































































































































































Отзывы: