manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Руководство пользователя, Страница: 29 / 348

Поделиться
Скачать
MARUTI SUZUKI S-Cross Скачать руководство пользователя страница 29

2-10

BEFORE DRIVING

64MS0-74E

If the remote controller is left in the vehicle
and you lock the driver’s door or front pas-
senger’s door as described below, the door
will be automatically unlocked.
• If you open the driver’s door and lock the

door by turning the lock knob forward or
pushing the power door locking switch,
the driver’s door will be automatically
unlocked.

• If you open the front passenger’s door

and lock the door by turning the lock
knob forward or pushing the power door
locking switch, the front passenger’s
door will be automatically unlocked.

NOTE:
• The reminder will not operate when the

remote controller is on the instrument
panel, in the glove box, in a storage
compartment, in the sun visor or on the
floor etc.

• Be sure that the driver always carries the

remote controller.

• Do not leave the remote controller in the

vehicle when leaving the vehicle.

Replacement of the battery

If the remote controller becomes unreli-
able, replace the battery.

To replace the battery of the remote con-
troller:

71LMT0201

1) Pull the key out from the remote con-

troller.

2) Insert a flat blade screwdriver covered

with a soft cloth in the slot of the remote
controller and pry it open.

68LM210

(1) Lithium disc type battery:

CR2032 or equivalent

3) Replace the battery (1) so its + terminal

faces the bottom of the case as shown
in the illustration.

4) Close the remote controller firmly.
5) Make sure the door locks can be oper-

ated with the remote controller.

6) Dispose of the used battery properly

according to applicable rules or regula-
tions. Do not dispose of lithium batter-
ies with ordinary household trash.

NOTICE

When replacing the battery, do not
touch the electronic component in the
remote controller with wet or oil-
stained hands. Otherwise, the remote
controller may be damaged.

EXAMPLE

(1)

EXAMPLE

WARNING

Swallowing a lithium battery may
cause serious internal injury. Do not
allow anyone to swallow a lithium
battery. Keep lithium batteries away
from children and pets. If swallowed,
contact a physician immediately.

Содержание S-Cross





























































































































































































































































































































































Отзывы:

Нет отзывов