manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Руководство пользователя, Страница: 179 / 348

Поделиться
Скачать
MARUTI SUZUKI S-Cross Скачать руководство пользователя страница 179

5-36

OTHER CONTROLS AND EQUIPMENT

64MS0-74E

NOTE: 
• Do not use commercially available CD

protection sheets or discs equipped with
stabilizers, etc.
These may get caught in the internal
mechanism and damage the disc.

• It may not be possible to play CD-R

discs with this unit due to the recording
conditions.

• CD-RW discs cannot be played with this

unit.

®

  (If equipped)

The Bluetooth

®

 word mark and logo are

registered trademarks and are owned by
the Bluetooth SIG, Ink.

Stop using this unit and a Bluetooth

®

ready device whenever requested.

This unit shares the communication fre-
quency with other private or public wireless
communication equipment such as a wire-
less LAN and other wireless communica-
tion radios.
You should stop using this unit whenever
you are notified that your unit disturbs
other wireless communication immediately.

Bluetooth

®

 Mic (1) (if equipped)

WARNING

This is a class I laser product. Use of
controls or adjustments or perfor-
mance of procedures other than
those specified herein may result in
hazardous radiation exposure.
Do not open covers and do not
attempt to repair this unit by yourself.
Refer a qualified personnel for servic-
ing.

(1)

EXAMPLE

Содержание S-Cross





























































































































































































































































































































































Отзывы:

Нет отзывов