manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Руководство пользователя, Страница: 199 / 348

Поделиться
Скачать
MARUTI SUZUKI S-Cross Скачать руководство пользователя страница 199

5-56

OTHER CONTROLS AND EQUIPMENT

64MS0-74E

Phone registration

NOTE:
• Up to 5 phones can be registered.
• To set up a new phone, disconnect the

audio player from the unit. Connect the
audio player again after phone setup is
completed if necessary.

• When failed to establish the pairing

within 120 seconds, the connecting
operation will be canceled. Please try
again or refer to the manual of the phone
in use for how to establish the pairing
with the phone.

1) Press the Bluetooth

®

 setup button (4).

The Bluetooth

®

 setup menu will be dis-

played.

2) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select “Setup Blue-
tooth”, and press the knob (1) to deter-
mine the selection.

3) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select “Pairing”,
and press the knob (1) to determine the
selection.

4) Select “CAR AUDIO” from the Blue-

tooth

®

 menu of the phone and establish

the pairing.
Refer to the manual of the phone in use
for further information.

5) Enter the Passkey displayed on the unit

to the phone. (For phones with Blue-

tooth

®

 version 2.1 or above passkey

input is not required.)

6) Press the On Hook button (6).

NOTE:
• When selecting “Go Back”, the previous

menu will be displayed.

• When additionally registering a phone,

operate the same step from 1).

Receiving a call

Press the Off Hook button (5) to receive a
call.

Ending a call

Press the On Hook button (6) to end a call.

Rejecting a call (only for supported
models)

Press the On Hook button (6) to reject a
incoming call.

Adjusting the listening volume

• Turn the VOL PUSH POWER knob (2)

during a call.
Turning it clockwise increases the vol-
ume; turning it counterclockwise
decreases the volume.

• Press the VOL switch (7) during a call.

Pressing “+” of the switch increases the
volume, pressing “-” of the switch
decreases the volume.

Adjusting the ring volume

• Turn the VOL PUSH POWER knob (2)

while a call coming in.
Turning it clockwise increases the vol-
ume; turning it counterclockwise
decreases the volume.

• Press the VOL switch (7) during a call.

Pressing “+” of the switch increases the
volume, pressing “-” of the switch
decreases the volume.

Adjusting the call or ringtone volume

Follow the instructions below to adjust the
call or ringtone volume.
1) Press the Bluetooth

®

 setup button (4). 

The Bluetooth

®

 setup menu will be dis-

played.

2) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select “Setup Tele-
phone”, and press the knob (1) to deter-
mine the selection.

3) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select “Sound Set-
ting”, and press the knob (1) to deter-
mine the selection.

4) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select “Call Vol-
ume” or “Ringtone Volume”, and press
the knob (1) to determine the selection.
The current call or ringtone volume will
be displayed.

5) Turn the TUNE FOLDER PUSH

SOUND knob (1) to select desired call
or ringtone volume, and press the knob
(1) to determine the selection.

NOTE:
When selecting “Go Back”, the previous
menu will be displayed.

To use the hands-free function with this
unit, it is required to register the phone
in advance.

Содержание S-Cross





























































































































































































































































































































































Отзывы:

Нет отзывов