manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Руководство пользователя, Страница: 126 / 348

Поделиться
Скачать
MARUTI SUZUKI S-Cross Скачать руководство пользователя страница 126

3-27

OPERATING YOUR VEHICLE

64MS0-74E

Set Sensors

You can select either the normal or trailer
mode of the parking sensor via the infor-
mation display. Refer to “Information Dis-
play” in the “BEFORE DRIVING” section.

Normal mode

All sensors operate. Use this mode under
normal conditions.

Trailer mode

The rear corner and rear center sensors
are inhibited from operating. Use this
mode when towing a trailer.

NOTICE

Make sure the normal mode is
selected with the parking sensor
when steering the vehicle into a
garage. If the parking sensor is left in
the trailer mode, the rear corner and
rear center sensors are not function-
ing.

Warning and Indicator Messages

If there is a problem or warning regarding the parking sensor system, a message is dis-
played on the information display in the instrument cluster, and a symbol blinks and the
buzzer sounds. If a message is displayed, follow its instruction.

Message

Symbol

Buzzer

Probable cause and remedy

Two blinking 
lines in a sen-
sor location.

Series of 
double 
beeps

There may be problem with the 
parking sensor system.
Have your vehicle inspected by 
an authorised Maruti Suzuki 
workshop.

One blinking 
line in a sensor 
location.

Series of 
single 
beeps

The indicated sensor is contami-
nated.
Wipe it clean with a soft cloth.

Содержание S-Cross





























































































































































































































































































































































Отзывы:

Нет отзывов