manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Руководство пользователя, Страница: 33 / 348

Поделиться
Скачать
MARUTI SUZUKI S-Cross Скачать руководство пользователя страница 33

2-14

BEFORE DRIVING

64MS0-74E

mation display, refer to “Information
Display” in this section.

• Your dealer may have already set the

shock sensor of the vehicle to the
enabled state before you purchase it.
Consult your dealer for further informa-
tion.

NOTE:
• The security system generates alarms

when any of the predetermined condi-
tions is met. However, the system does
not have any function of blocking unau-
thorized entry into the vehicle.

• Always use the keyless entry system

transmitter, keyless push start system
remote controller or request switch to
unlock the doors when the security sys-
tem has been armed. Using a key
instead will trigger the alarm.

• If a person who does not know the secu-

rity system is going to drive the vehicle,
we recommend you explain the system
and its operation to the person. Mistak-
enly triggering the alarm may cause a
nuisance to others.

• Even if the security system is armed,

you should still be careful to guard
against theft. Do not leave money or
things of value in the vehicle.

How to arm the security system 

Lock all doors (including the engine hood
and tailgate) using the keyless entry sys-
tem transmitter, keyless push start system
remote controller or request switch.
When the system is armed, the indicator
continues to blink at intervals of approxi-
mately 2 seconds.

61MM0A134

NOTE:
• To prevent the alarm from being acci-

dentally triggered, avoid arming it while
anyone remains inside the vehicle. The
alarm will be triggered if any person
inside opens the door, tailgate, engine
hood, or warning may be triggered if
anyone swings the vehicle (if the shock
sensor is in the enabled state).

• The security system is not armed when

all doors are locked using the key from
outside, or using the door lock knobs or

the central door locking switch from
inside.

• If any door is not operated within approx-

imately 30 seconds after the doors have
been unlocked using the keyless entry
system transmitter, keyless push start
system remote controller or request
switch, the doors are automatically
locked again. When the doors are
locked, the security system will be
armed.

• If the security system indicator (1) blinks

when the ignition switch is in the “ON”
position or the ignition mode is “ON”,
there may be something wrong with the
security system. Ask your authorised
Maruti Suzuki workshop to inspect the
system.

How to disarm the security system

Simply unlock the doors using the keyless
entry system transmitter, keyless push
start system remote controller or request
switch. The security system indicator will
go out, indicating that the security system
is disarmed.

How to stop the alarm

Should the alarm be triggered accidentally,
unlock the doors using the keyless entry
system transmitter, keyless push start sys-
tem remote controller or request switch, or
in case of emergency, insert the key in the
ignition switch and turn it to “ON” position,
or press the engine switch to change the
ignition mode to “ON”. The alarm will then
stop.

(1)

EXAMPLE

Содержание S-Cross





























































































































































































































































































































































Отзывы:

Нет отзывов