manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Руководство пользователя, Страница: 134 / 348

Поделиться
Скачать
MARUTI SUZUKI S-Cross Скачать руководство пользователя страница 134

4-1

DRIVING TIPS

 

65D231

Running-in

Catalytic converter

64MM04002

The purpose of the catalytic converter is to
minimize the amount of harmful pollutants
in your vehicle’s exhaust. Use of leaded
fuel in vehicles equipped with catalytic
converters is prohibited, because lead
deactivates the pollutant-reducing compo-
nents of the catalyst system.

The converter is designed to last the life of
the vehicle under normal usage and when
unleaded fuel is used. No special mainte-
nance is required on the converter. How-
ever, it is very important to keep the engine
properly tuned. Engine misfiring, which can
result from an improperly tuned engine,
may cause overheating of the catalytic
converter. This may result in permanent
heat damage to the catalytic converter and
other vehicle components.

WARNING

• WEAR YOUR SEAT BELTS AT ALL

TIMES. Even though air bags are
equipped at the front seating posi-
tions, the driver and all passengers
should be properly restrained at all
times, using the seat belts pro-
vided. Refer to “Seat belts and
child restraint systems” section for
instructions on proper use of the
seat belts.

• Never drive under the influence of

alcohol or other drugs. Alcohol and
drugs can seriously impair your
ability to drive safely, greatly
increasing the risk of injury to
yourself and others. You should
also avoid driving when you are
tired, sick, irritated or under stress.

EXAMPLE

NOTICE

The future performance and reliabil-
ity of the engine depends on the care
and restraint exercised during its
early life. It is especially important to
observe the following precautions
during the first 960 km of vehicle
operation.
• After starting, do not race the

engine. Warm it up gradually.

• Avoid prolonged vehicle operation

at a constant speed. Moving parts
will break in better if you vary your
speed.

• Start off from a stop slowly. Avoid

full throttle starts.

• Avoid hard braking, especially

during the first 320 km of driving.

• Do not drive slowly with the trans-

axle in a high gear.

• Drive the vehicle at moderate

engine speeds.

• Do not tow a trailer during the first

960 km of the vehicle operation.

EXAMPLE

Содержание S-Cross





























































































































































































































































































































































Отзывы:

Нет отзывов