MARUTI SUZUKI S-Cross Скачать руководство пользователя страница 186

Страница: 186 / 348

5-43

OTHER CONTROLS AND EQUIPMENT

64MS0-74E

Fast forwarding/Rewinding a track

• Hold down the Up button (4) to fast for-

ward the track.

• Hold down the Down button (5) to fast

rewind the track.

Random playback

Press the RDM button (7).
Each time the button is pressed, the mode
will change as follows:

• TRACK RANDOM

The random indicator “RDM” will light.
The tracks in the loaded disc will be
played in random order.

Repeat playback

Press the RPT button (6).
Each time the button is pressed, the mode
will change as follows:

• TRACK REPEAT

The repeat indicator “RPT” will light.
The track currently being played will be
played repeatedly.

Display change

Press the DISP button (8).
Each time the button is pressed, display
will change as follows:

NOTE:
• “NO TITLE” will be displayed when there

is no text information in the disc currently
being played.

• If text data contains more than 12 char-

acters, the “>” mark will appear at the
right end. Holding down the DISP button
(8) for 1 second or longer can display the
next page.

OFF

TRACK

RANDOM

OFF

TRACK

REPEAT

Play time

Disc title

Track title

Содержание S-Cross





























































































































































































































































































































































Результаты поиска

Содержание S-Cross

Отзывы:

MARUTI SUZUKI S-Cross, Руководство пользователя, Страница: 186 / 348

Результаты поиска

Содержание S-Cross

Отзывы: