manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Руководство пользователя

"MARUTI SUZUKI S-Cross" - это превосходный внедорожник с инновационной технологией и стильным дизайном. Для вашего удобства, вы можете скачать бесплатно Руководство Пользователя с нашего сайта manualshive.com. Этот мануал поможет вам лучше понять функции и возможности вашего автомобиля.

Поделиться
Скачать
background image

2-50

BEFORE DRIVING

64MS0-74E

Instantaneous fuel consumption

The display shows instantaneous fuel con-
sumption with a bar graph only when the
vehicle is moving.

NOTE:
• The display does not show the bar graph

unless the vehicle is moving.

• Depending on the vehicle’s specification,

the fuel consumption units of initial set-
ting are indicated as L/100km, km/L,
MPG (UK) or MPG (US).

• For “L/100km” or “km/L” setting, the indi-

cated maximum value of instantaneous
fuel consumption is 30. No more than 30
will be indicated on the display even if
the actual instantaneous fuel consump-
tion is higher.

• For “MPG (UK)” setting, the indicated

maximum value of instantaneous fuel
consumption is 80. No more than 80 will
be indicated on the display even if the
actual instantaneous fuel consumption is
higher.

• For “MPG (US)” setting, the indicated

maximum value of instantaneous fuel
consumption is 60. No more than 60 will
be indicated on the display even if the
actual instantaneous fuel consumption is
higher.

• The indication on the display may be

delayed if fuel consumption is greatly
affected by driving conditions.

• The display shows estimated values.

Indications may not be the same as
actual values.

Average fuel consumption

If you selected average fuel consumption
the last time you drove the vehicle, the dis-
play shows the last value of average fuel
consumption from previous driving when
the ignition switch is turned to the “ON”
position or the engine switch is pressed to
change the ignition mode to “ON”. Unless
you reset the value of average fuel con-
sumption, the display indicates the value of
average fuel consumption which includes
average fuel consumption during previous
driving.

NOTE:
When you reconnect the negative (–) ter-
minal to the battery, the value of average
fuel consumption will be shown after driv-
ing for a period of time.

You can select when the value of average
fuel consumption is reset from among the
following three methods;
• Reset after refuel: the value of average

fuel consumption will be reset automati-
cally by refueling.

• Reset with trip A: the value of average

fuel consumption will be reset automati-
cally by resetting trip meter A.

• Reset manually: the value of average

fuel consumption will be reset by push-
ing and holding the indicator selector
knob (2) when the display indicates the
average fuel consumption.

To change when the value of average fuel
consumption is reset, refer to “Setting
Mode” later in this section. 

NOTE:
If you add only a small amount of fuel
when you select “Reset after refuel”, the
average fuel consumption value may not
be reset.

Driving range

If you selected driving range the last time
you drove the vehicle, the display indicates
“---” for a few seconds and then indicates
the current driving range when the ignition
switch is turned to the “ON” position or the
engine switch is pressed to change the
ignition mode to “ON”.

The driving range shown in the display is
the approximate distance you can drive
until the fuel gauge indicates “E”, based on
current driving conditions.

When the low fuel warning light comes on,
the display “---” will appear. 
If the low fuel warning light comes on, fill
the fuel tank immediately.

As the driving range after refueling is cal-
culated based on the most recent driving
condition, the value is different each time
you refuel.

NOTE:
• If you refuel when the ignition switch is in

the “ON” position or the ignition mode is
“ON”, the driving range may not indicate
the correct value.

• When you reconnect the negative (–)

terminal to the battery, the value of driv-

Содержание S-Cross





























































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для S-Cross

Hama Neptun Manual preview
Neptun
Бренд: Hama Страницы: 6
IAME Parilla X30 Assembly Instructions And User'S Manual preview
Parilla X30
Бренд: IAME Страницы: 17
Q'STRAINT QLK-150 Installation Instructions Manual preview
QLK-150
Бренд: Q'STRAINT Страницы: 10
Yakima SideWinder Installation Instructions And Owner'S Manual preview
SideWinder
Бренд: Yakima Страницы: 8
JANE be cool boosty Manual preview
be cool boosty
Бренд: JANE Страницы: 21
Cadillac 2012 Escalade Hybrid Manual preview
2012 Escalade Hybrid
Бренд: Cadillac Страницы: 90
Ultra-tow XTP Series Owner'S Manual preview
XTP Series
Бренд: Ultra-tow Страницы: 14
Mercedes-Benz 300D 2.5 1990 Owner'S Manual preview
300D 2.5 1990
Бренд: Mercedes-Benz Страницы: 121
Menabo BIKE PRO Fitting Instructions Manual preview
BIKE PRO
Бренд: Menabo Страницы: 8
Camtree G-51 Instruction Manual preview
G-51
Бренд: Camtree Страницы: 5
Phonocar VM338 Mounting Instructions preview
VM338
Бренд: Phonocar Страницы: 6
Maserati Gransport Owner'S Manual preview
Gransport
Бренд: Maserati Страницы: 210
OnStar liveon Owner'S Manual preview
liveon
Бренд: OnStar Страницы: 22
Yakima Landing Pad 24 Quick Start Manual preview
Landing Pad 24
Бренд: Yakima Страницы: 11
Westfalia 305 158 Mounting Instructions preview
305 158
Бренд: Westfalia Страницы: 10
cam PFF Series Operating Manual preview
PFF Series
Бренд: cam Страницы: 28
Prorack K577W Fitting Instructions Manual preview
K577W
Бренд: Prorack Страницы: 15
Rugged Ridge 53701.52 Installation Manual preview
53701.52
Бренд: Rugged Ridge Страницы: 5

Бренды по названию

Популярные бренды

Загрузить еще бренды