manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Руководство пользователя, Страница: 110 / 348

Поделиться
Скачать
MARUTI SUZUKI S-Cross Скачать руководство пользователя страница 110

3-11

OPERATING YOUR VEHICLE

64MS0-74E

Starting a Cold and Warm Engine

Cold engine

Turn the ignition switch to the “ON” posi-
tion and wait until the glow plug indicator
goes out if it comes on. Crank the engine
by turning the ignition key to “START”.
Release the key when the engine starts.

Warm engine

Crank the engine by turning the ignition
key to “START”. Release the key when the
engine starts.

Caution when stopping the engine with
turbocharger

When stopping the engine after climbing or
high speed driving, let the engine idle for
about one minute or more (if it is not pro-
hibited) to cool down the turbocharger and
engine oil. This is to prevent the engine oil
from over-deteriorating. Deteriorated
engine oil will damage the bearings of the
turbocharger.

Restarting diesel engine after fuel-
empty stop

If the engine stops and the low fuel warning
light and the malfunction indicator light
come on, use the following procedure:
1) Fill the fuel tank.
2) Hold the ignition key in “ON” position for

5-10 seconds to feed fuel.

3) Perform above engine starting proce-

dure to start the engine.

If the malfunction indicator light still comes
on after the engine started, there may be
some problem with the engine. Ask your
authorised Maruti Suzuki workshop to have
the engine inspected.

Starting the Engine 
(Vehicle with Keyless Push Start 
System)

Before Starting the Engine

64MM03001

1) Make sure the parking brake is set fully.
2) Shift to “N” (Neutral) and fully depress

the clutch pedal. Hold the clutch and
brake pedals fully depressed.

82K254

NOTICE

• Stop turning the starter immedi-

ately after the engine has started or
the starter system can be damaged.

• Do not crank the engine for more

than 30 seconds at a time. If the
engine doesn’t start on the first try,
wait about 15 seconds before try-
ing again.

EXAMPLE

(1)

EXAMPLE

Содержание S-Cross





























































































































































































































































































































































Отзывы:

Нет отзывов