manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Руководство пользователя, Страница: 107 / 348

Поделиться
Скачать
MARUTI SUZUKI S-Cross Скачать руководство пользователя страница 107

3-8

OPERATING YOUR VEHICLE

64MS0-74E

(1) Immobilizer/keyless push start sys-

tem warning light (blinks)

(2) Master warning indicator light (blinks)

NOTE:
• If the warning is given, locate the remote

controller as soon as possible.

• Any attempt to start the engine will fail

while the warning is active. The mes-
sage appearing on the information dis-
play in the instrument cluster will also
indicate this condition. Refer to “Informa-
tion display” in the “BEFORE DRIVING”
section for details.

• Normally, the immobilizer/keyless push

start system warning light should go out
and the master warning indicator light
should stop blinking shortly after the
remote controller is brought back inside
the vehicle. If they remain lit and blink-
ing, change the ignition mode to “LOCK”
(OFF) by pressing the engine switch and
then perform the engine starting opera-
tion. Refer to “Starting the Engine” in this
section.

• Always keep the remote controller with

you as the driver.

Interior Workable Area for Engine 
Starting, Ignition Mode Selection 
and Remote Controller Outside 
Warning

61MM0B002

(1) Interior workable area

The interior workable area for these func-
tions is defined as all the interior spaces
except for the space above the instrument
panel.

NOTE:
• Even when the remote controller is in the

“interior workable area”, if it is in any of
the following conditions, you may not be
able to start the engine or select the igni-
tion modes, and the REMOTE CON-
TROLLER OUTSIDE warning may be
given.
– The remote controller’s battery is low.
– The remote controller is affected by

strong radio signals or noise.

– The remote controller is in contact with

or covered by a metallic object.

– The remote controller is in stowage

like the glove box or a door pocket.

– The remote controller is in the sun

visor pocket or on the floor.

• Even when the remote controller is out-

side the “interior workable” area, if it is in
any of the following conditions, you may
be able to start the engine or select the
ignition mode. The REMOTE CON-
TROLLER OUTSIDE warning may not
be given at that time.
– The remote controller is outside the

vehicle but very close to a door.

– The remote controller is on the instru-

ment panel.

(1)

EXAMPLE

Содержание S-Cross





























































































































































































































































































































































Отзывы:

Нет отзывов