manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Руководство пользователя, Страница: 119 / 348

Поделиться
Скачать
MARUTI SUZUKI S-Cross Скачать руководство пользователя страница 119

3-20

OPERATING YOUR VEHICLE

64MS0-74E

NOTE:
• The gearshift indicator is not indicated

when the gear position is in “N” (Neu-
tral).

• If you depress the clutch pedal while UP/

DOWN arrow is indicated, the indication
will disappear.

• If you release your foot from the acceler-

ator pedal while UP arrow is indicated,
the indication will display the currently
selected gear position.

• The indication of gearshift indicator tim-

ing may differ depending on the vehicle
condition and/or driving situation even in
the same vehicle speed and engine rev-
olution.

WARNING

The gearshift indicator is designed to
indicate optimal gear position for
your driving, however, a driver will
not be relieved from the duty of care
of driving operation or gear change
with this indicator.
To drive safe, do not gaze the gear-
shift indicator, pay attention to your
driving situation and shift up or down
if necessary.

Example of the gearshift indicator

Indication

Description

Lower gear position is selected for the vehicle speed and/or 
engine revolution. Changing to a higher gear position is recom-
mended.
• In this case, shifting up to 4th gear position is recommended.

Currently selected gear position is indicated.
• In this case, your vehicle is running in 3rd gear position.

Higher gear position is selected for the vehicle speed and/or 
engine revolution. Changing to a lower gear position is recom-
mended.
• In this case, shifting down to 2nd gear position is recom-

mended.

Содержание S-Cross





























































































































































































































































































































































Отзывы:

Нет отзывов