manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Руководство пользователя, Страница: 103 / 348

Поделиться
Скачать
MARUTI SUZUKI S-Cross Скачать руководство пользователя страница 103

3-4

OPERATING YOUR VEHICLE

64MS0-74E

You must push in the key to turn it to the
“LOCK” position. It locks the ignition, and
prevents normal use of the steering wheel
after the key is removed.

To release the steering lock, insert the key
and turn it clockwise to one of the other
positions. If you have trouble turning the
key to unlock the steering, try turning the
steering wheel slightly to the right or left
while turning the key.

ACC

Accessories such as the radio can oper-
ate, but the engine is off.

ON

This is the normal operating position. All
electrical systems are on.

START

This is the position for starting the engine
using the starter motor. The key should be
released from this position as soon as the
engine starts.

Ignition key reminder (if equipped)

A buzzer sounds intermittently to remind
you to remove the ignition key if it is in the
ignition switch when the driver’s door is
opened.

64MM03009

WARNING

• Never return the ignition switch to

the “LOCK” position and remove the
ignition key while the vehicle is
moving. The steering wheel will lock
and you will not be able to steer the
vehicle.

• Always return the ignition switch to

the “LOCK” position and remove the
ignition key when leaving the vehi-
cle even if only for a short time. Also
do not leave children alone in a
parked vehicle. Unattended children
could cause accidental movement of
the vehicle or could tamper with
power windows. They also could
suffer from heat stroke in warm or
hot weather. These could result in
severe injury or even death.

EXAMPLE

NOTICE

• Do not use the starter motor for

more than 30 seconds at a time. If
the engine does not start, wait 15
seconds before trying again. If the
engine does not start after several
attempts, check the fuel and ignition
systems or consult your authorised
Maruti Suzuki workshop.

• Do not leave the ignition switch in

the “ON” position if the engine is
not running as the battery will dis-
charge.

Содержание S-Cross





























































































































































































































































































































































Отзывы:

Нет отзывов