MARUTI SUZUKI S-Cross Скачать руководство пользователя страница 209

Страница: 209 / 348

5-66

OTHER CONTROLS AND EQUIPMENT

64MS0-74E

Deletion of audio device information
(Delete Audio)

Follow the instructions below to delete the
registered information of audio device.
1) Press the Bluetooth

setup button (6).

The Bluetooth

setup menu will be dis-

played.

2) Turn the TUNE FOLDER PUSH

SOUND knob (2) to select “Setup Blue-
tooth”, and press the knob (2) to deter-
mine the selection.

3) Turn the TUNE FOLDER PUSH

SOUND knob (2) to select “List Audio”,
and press the knob (2) to determine the
selection.

4) Turn the TUNE FOLDER PUSH

SOUND knob (2) to select an audio
device to be deleted, and press the
knob (2) to determine the selection.

5) Turn the TUNE FOLDER PUSH

SOUND knob (2) to select “Delete”, and
press the knob (2) to determine the
selection.

6) Turn the TUNE FOLDER PUSH

SOUND knob (2) to select “Delete?”,
and press the knob (2) to determine the
selection.

7) Turn the TUNE FOLDER PUSH

SOUND knob (2) to select “Confirm”,
and press the knob (2) to complete the
deletion.

NOTE:
When selecting “Go Back”, the previous
menu will be displayed.

Disclaimer for Bluetooth

function

• Depending on the mobile phone models,

some phones may not be compatible
fully or partially (some function may be
restricted).

• Connectivity or voice quality may get

affected depending on circumstances.

• After the ignition switch is turned to the

“ON” position, the audio system takes
few seconds to detect and connect to
the Bluetooth

device (if already paired)

• Make sure that you are aware of all

applicable lock laws and accordingly use
Bluetooth

device.

Remote Audio Controls
(if equipped)

Controlling of basic functions of the audio
system is available using the switches on
the steering wheel.

Adjusting the volume

• To increase the volume, hold down “+” of

the VOL switch (1). The volume will keep
on being increased until the switch is
released.

• To decrease the volume, hold down “-” of

the VOL switch (1). The volume will keep
on being decreased until the switch is
released.

• To mute the sound, press the switch (2).

Selecting the mode

Press the switch (3).
Each time the button is pressed, the mode
will change as follows:

(2)

(3)

(1)

(4)

EXAMPLE

Содержание S-Cross





























































































































































































































































































































































Результаты поиска

Содержание S-Cross

Отзывы:

MARUTI SUZUKI S-Cross, Руководство пользователя, Страница: 209 / 348

Результаты поиска

Содержание S-Cross

Отзывы: