manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Руководство пользователя, Страница: 44 / 348

Поделиться
Скачать
MARUTI SUZUKI S-Cross Скачать руководство пользователя страница 44

2-25

BEFORE DRIVING

64MS0-74E

Seat Belts and Child Restraint 
Systems

65D231S

65D606

65D201

WARNING

Wear Your Seat Belts at All Times.

WARNING

An air bag supplements, or adds to,
the frontal crash protection offered
by seat belts. The driver and all pas-
sengers must be properly restrained
by wearing seat belts at all times,
whether or not an air bag is mounted
at their seating position, to minimize
the risk of severe injury or death in
the event of a crash.

EXAMPLE

WARNING

• Never allow persons to ride in the

cargo area of a vehicle. In the event
of an accident, there is a much
greater risk of injury for persons
who are not riding in a seat with
their seat belt securely fastened.

• Seat belts should always be

adjusted as follows:
– the lap portion of the belt should

be worn low across the pelvis,
not across the waist.

– the shoulder straps should be

worn on the outside shoulder
only, and never under the arm.

– the shoulder straps should be

away from your face and neck,
but not falling off your shoulder.

(Continued)

Above the pelvis

EXAMPLE

WARNING

(Continued)

• Seat belts should never be worn

with the straps twisted and should
be adjusted as tightly as is com-
fortable to provide the protection
for which they have been designed.
A slack belt will provide less pro-
tection than a snug belt.

• Make sure that each seat belt

buckle is inserted into the proper
buckle catch. It is possible to cross
the buckles in the rear seat.

(Continued)

Across the pelvis

EXAMPLE

Содержание S-Cross





























































































































































































































































































































































Отзывы:

Нет отзывов