manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Руководство пользователя, Страница: 104 / 348

Поделиться
Скачать
MARUTI SUZUKI S-Cross Скачать руководство пользователя страница 104

3-5

OPERATING YOUR VEHICLE

64MS0-74E

Engine Switch
(Vehicle with Keyless Push 
Start System)

61MM0B001

LOCK (OFF)

This is the normal parking position. It is the
only position in which the key can be
removed.

ACC

Press the engine switch to select this igni-
tion mode to use such electric equipment
as the audio system, outside rearview mir-
rors and accessory socket with the engine
off. When this position is selected, the
information display in the instrument clus-
ter shows the following message: “ACC”
IGNITION SWITCH POSITION. Refer to
“Information Display” in the “BEFORE
DRIVING” section for details.

ON
• With the engine off

You can use such electric equipment as
the power windows and wipers with the
engine off. When this ignition mode is
selected by pressing the engine switch,
the information display in the instrument
cluster shows the following message:
“ON” IGNITION SWITCH POSITION.

• With the engine on

All electric equipment is operational. The
vehicle can be driven when you have
selected this ignition mode by pressing
the engine switch.

START

The engine automatically starts when you
press the engine switch to select this igni-
tion mode after shifting to “N” (Neutral) and
depressing the brake and clutch pedals.

NOTE:
You do not need to keep the engine switch
pressed until the engine starts.

NOTE:
In the presence of strong radio signals or
noise, you may not be able to change the
ignition mode to “ACC” or “ON” or to start
the engine using the engine switch. In this
case, the information display on the instru-
ment cluster will show the following mes-
sage: KEY FOB NOT DETECTED.

Unreleased Steering Lock Warning

If the steering lock remains engaged when
you press the engine switch to change the
ignition mode to “ON”, the information dis-
play in the instrument cluster shows the
message: “TRN. STEERING WHEEL TO
RELEASE LOCK”. Refer to “Information
Display” in the “BEFORE DRIVING” sec-
tion for details.

NOTE:
• The steering lock may not be released if

some load is acting on the steering
wheel. If this happens, turn the steering
wheel to the right or left to relieve it from
the load before you press the engine
switch again to change to the desired
ignition mode.

• In the presence of strong radio wave or

noise, you may not be able to change
the ignition mode to “ACC” or “ON” or to
start the engine using the engine switch.

EXAMPLE

NOTICE

Do not leave the engine switch in the
“ACC” or “ON” mode when the
engine is not running. Avoid using
the radio or other electric accesso-
ries for a long time when the engine
switch is in the “ACC” or “ON” mode
when the engine is not running, oth-
erwise the battery may discharge.

Содержание S-Cross





























































































































































































































































































































































Отзывы:

Нет отзывов