manualshive.com logo in svg

MARUTI SUZUKI S-Cross, Руководство пользователя

"MARUTI SUZUKI S-Cross" - это превосходный внедорожник с инновационной технологией и стильным дизайном. Для вашего удобства, вы можете скачать бесплатно Руководство Пользователя с нашего сайта manualshive.com. Этот мануал поможет вам лучше понять функции и возможности вашего автомобиля.

Поделиться
Скачать
background image

2-29

BEFORE DRIVING

64MS0-74E

NOTE:
To identify the center seat belt buckle and
latch plate in the rear seat, “CENTER” is
marked on the buckle and latch plate of the
center lap belt. The buckles are designed
so a latch plate cannot be inserted into the
wrong buckle.

Driver’s Seat Belt Reminder

64MM02012

(1) Driver’s seat belt reminder light

When the driver doesn’t buckle his or her
seat belt, with the ignition switch in the
“ON” position or the ignition mode “ON”,
the driver’s seat belt reminder light in the
instrument cluster will blink and a buzzer
will sound as a reminder to the driver to
buckle his or her sear belt. For more
details, refer to the explanation below.

If the driver’s seat belt remains unbuckled
when the ignition switch is in the “ON”
position or the ignition mode is “ON”, the
reminder works as follows:

1. The driver’s seat belt reminder light will

come on. 

2. After the vehicle’s speed has reached

about 15 km/h, the driver’s seat belt
reminder light will blink and a buzzer
will sound for about 95 seconds.

3. After step 2) has finished, the reminder

light will remain on until the driver’s seat
belt is buckled.

If the driver has buckled his or her seat belt
and later unbuckles the seat belt, the seat
belt reminder system will be activated from
step 1) or step 2) according to vehicle’s
speed. When the vehicle’s speed is below
about 15 km/h, the reminder will start from
step 1). When the vehicle’s speed is above
about 15 km/, the reminder will start from
step 2).

The reminder will be automatically can-
celed when the driver’s seat belt is buckled
or the ignition switch is turned “OFF”, igni-
tion mode is switched to “LOCK” (OFF)
position.

Shoulder Anchor Height Adjuster 

64J198

Adjust the shoulder anchor height so that
the shoulder belt rides on the center of the
outboard shoulder. To move upward, slide
the anchor up. To move downward, slide
the anchor down while pulling the lock
knob out. After adjustment, make sure that
the anchor is securely locked.

(1)

EXAMPLE

WARNING

It is absolutely essential that the
driver and passengers wear their seat
belts at all times. Persons who are
not wearing seat belts have a much
greater risk of injury if an accident
occurs. Make a regular habit of buck-
ling your seat belt before putting the
key in the ignition or pressing the
engine switch.

WARNING

Be sure that the shoulder belt is posi-
tioned on the center of the outside
shoulder. The belt should be away
from your face and neck, but not fall-
ing off your shoulder. Misadjustment
of the belt could reduce the effective-
ness of the safety belt in a crash.

EXAMPLE

Содержание S-Cross





























































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для S-Cross

ULTIMATE SPEED CARBON Assembly And Safety Advice preview
CARBON
Бренд: ULTIMATE SPEED Страницы: 19
Porsche 911 GT3R 2010 Technical Manual preview
911 GT3R 2010
Бренд: Porsche Страницы: 144
Carax HUD CRX-3001 Quick Start Manual preview
HUD CRX-3001
Бренд: Carax Страницы: 2
Warrior Products 4560 Manual preview
4560
Бренд: Warrior Products Страницы: 4
Vintage Air 561163 Manual preview
561163
Бренд: Vintage Air Страницы: 28
Yescom YES5062 User Manual preview
YES5062
Бренд: Yescom Страницы: 4
Z Automotive Tazer DT User Manual preview
Tazer DT
Бренд: Z Automotive Страницы: 16
Honda 2010 Civic Sedan Owner'S Manual preview
2010 Civic Sedan
Бренд: Honda Страницы: 390
Parkeon StradaPAL Installation Manual preview
StradaPAL
Бренд: Parkeon Страницы: 43
Jeep Cherokee 1977 Owner'S Manual preview
Cherokee 1977
Бренд: Jeep Страницы: 136
WABCO Truck Training Model Operating Instructions Manual preview
Truck Training Model
Бренд: WABCO Страницы: 56
Valeo Park Vision VAL632210 Instruction Manual preview
Park Vision VAL632210
Бренд: Valeo Страницы: 25
Axxess AXRC-CH1 Installation Instructions Manual preview
AXRC-CH1
Бренд: Axxess Страницы: 8
Dodge Charger 1973 Body Service Manual preview
Charger 1973
Бренд: Dodge Страницы: 276
HAKR TRIP 3 Instructions For Use Manual preview
TRIP 3
Бренд: HAKR Страницы: 9
Curt Manufacturing 58963 Installation Manual preview
58963
Бренд: Curt Manufacturing Страницы: 4
Whispbar K559W Fitting Instructions Manual preview
K559W
Бренд: Whispbar Страницы: 112
Ford 1999 Crown Victoria Owner'S Manual preview
1999 Crown Victoria
Бренд: Ford Страницы: 208

Бренды по названию

Популярные бренды

Загрузить еще бренды