Open-loop Logic Outputs C3
76
Configure C0 menu
Analog Outputs C4 submenu
C4
parameter
description
default
hidden
item
run
lock
out
ANALOG OUTPUT 1
analog output #1
N
Y
ANALOG OUTPUT 2
analog output #2
N
Y
choices
bus voltage
Measured DC bus voltage
current out
Percent motor current
drv overload
Percent of drive overload trip level reached
flux current
Measured flux producing current
flux voltage
Flux producing voltage
frequency
out
Electrical
frequency
mtr overload
Percent of motor overload trip level reached
power output
Calculated power output
slip freq
Commanded slip frequency
speed command
Speed command before S-Curve
speed feedbk
Speed reference including all compensations included (slip comp, etc.)
speed ref
Speed reference after S-Curve
torq current
Measured torque producing current
torq voltage
Torque producing voltage
torque output
Calculated torque output
voltage out
RMS motor terminal voltage
Detailed description
ANALOG OUTPUT 1
(Analog Outputs 1)
Default:
This parameter defines the function of the
analog output #1.
NOTE: The
current
setting of each parameter is
displayed in all caps; all other choices in the list
are displayed in lower case.
ANALOG OUTPUT 2
(Analog Outputs 2)
Default:
This parameter defines the function of the
analog output #2.
NOTE: The
current
setting of each parameter is
displayed in all caps; all other choices in the list
are displayed in lower case.
Содержание HPV 600
Страница 1: ...HPV 600 AC Elevator Drive Technical Manual...
Страница 162: ......
Страница 163: ......