MACROMEDIA ColdFusion Server 5, Руководство пользователя, Страница: 64 / 328

46 Chapter 4 Managing Files
Working with Files
You can use the following procedures to work with files, regardless of their location
(local drive, network drive, or remote
server ).
Opening and saving files refer to the current directory. For information about how
ColdFusion Studio determines the current directory with two Files tabs, see
“About
the Files Tabs” on page 44 .
Setting startup options
To set startup options:
1 Select Options > Settings > Startup to select which files and folders open when
you load the program.
2 Select any of the startup options to:
•
Open all the documents that were open when the program last closed
•
Open the project that was open when the program last closed
•
Open a blank document
3 Select one of the following startup folder options to:
•
Open the folder that was last active in the Files tab
•
Open the folder that was last selected in the File > Open dialog box
•
Specify a default folder to open at startup
4 Click OK to close the Settings dialog box and save your new settings.
Opening files
Use the procedures below to open a file in the file list.
To open a standard file:
1 On the Files tab, use the Drive List and the Directory List to navigate to the
directory that contains the file you want to open.
2 Double-click the file in the file list or right-click the file and choose Edit from the
menu.
Note
Read-only files are marked with a red dot in the file list. You can right-click a file and
choose Properties from the menu to set read and write access. This is not
recommended, however, if you are using a source control application to manage read
and write privileges.