Mac Medical D Series, Установка, эксплуатация и обслуживание

Страница: 17 / 48

Instruction Manual
MAN-001
17
www.macmedical.com
The Controls are located on the upper panel (Fig. 10) on the front of the cabinet. For multi-chamber cabinets,
there are sets of controls for each individual chamber. Each control set is clearly labeled UPPER CHAMBER and
LOWER CHAMBER for dual chamber cabinets and UPPER CHAMBER, MIDDLE CHAMBER and LOWER CHAMBER
for the triple chamber cabinets.
Item Control
Components
function
1 ON/OFF Switch/
Circuit Breaker
Provides power to the warming compartment and control
2 HEAT light Visual indicator that the heating system is active
3 ALARM light Visual indicator of an overheat condition
4 Display Panel Shows the current chamber temperature (Actual) and the Setpoint temperature in
Fahrenheit (F) or Celsius (C). The upper readout row indicates what mode will be defined/
changed (i.e. top/bottom chamber, date, etc). It also continually indicates the actual
temperature. The lower readout row indicates the settings for the mode. It also continually
indicates the setting temperature. The display also provides Loss of Power and Overheat
(Alarm). The overheat alarm is an audble and visual display “HI”.
Numbers/letters are entered in reverse order, working from right to left across the controller.
5 UP arrow Adjusts the setpoint of the chamber and silence the audible overheat alarm.
6 DOWN arrow Adjust the setpoint of the chamber
7 SET buttom Press to change the setpoint temperature. Press again to save a setpoint temperature. SET is
also used to move to the next setting parameter/mode
8 DATA port USB port used to retrieve temperature values for a set period of time.
9 Key Switch Used to lock out any changes to the control, such as adjusting the setpoint temperature.
OFF
ON
Fig. 15: Controller Display
explanation of the Controls
1
2
3
4
5
6
7
8
9