Mac Medical D Series, Установка, эксплуатация и обслуживание

Страница: 30 / 48

Instruction Manual
MAN-001
30
www.macmedical.com
Remove Header Assembly box & Relocate Cam lock
Purchase Parts needed for Cam lock Reversal
• Felt Strip ST0014
• Plug W0098
The following steps apply to cabinets with steel or glass doors.
Cabinets are equipped with a cam lock in the header
assembly. This must be moved to the other side of the
header assembly box when the door hinges are reversed.
The door itself has a cam lock plate which also must be
moved near the new location of the cam lock (Note: Only
top doors on multi-chambered have a cam lock plate.)
4. To remove the Header Assembly Box, unscrew 4 hex
locking bolts from the header assembly box mounting
plates and remove the header assembly box. (Fig. 33)
5. To access the cam lock and
its new location, cut an area
out of the gasket cover in the
location shown by the red
rectangles (Fig. 34)
Fig. 33: Remove Header Assembly Box
Fig. 34: Cut Out Rectangular Sections from Gasket
Fig. 35 shows the header assembly interior (gasket removed for clarity). The cam lock (in red rectangle) will be
moved to the 2 oblong knock-out areas circled in red and highlighted in blue (Fig. 36).
Fig. 36: Knock out areas Fig. 35: Cam Lock to be Moved to New Location