Mac Medical D Series, Установка, эксплуатация и обслуживание

Страница: 31 / 48

Instruction Manual
MAN-001
31
www.macmedical.com
7. To detach the Cam Lock assembly, unscrew the Phillips head screw from the Cam Lock Latch (Fig. 39).
8. Unscrew the Hex Nut and remove the Lock Washer.
9. Pull the Cam Lock body out from the face of the Header Assembly.
10. Insert purchased Plug (W0098) into the hole originally occupied by the lock.
11. To re-install at the new position, slide the Trim ring onto the barrel of the Cam lock, insert Cam Lock body
through the oblong hole at the new position in the face of the header (Fig. 40).
6. At the new cam lock location, remove the 2 oblong knock-out areas. Cut an oblong shape in the plastic
overlay covering the short-wide oblong knock-out area to accomodate the cam lock when it is re-installed
(Fig. 37 and Fig. 38). The narrow-long oblong knock-out area will be the slot the cam lock latch fits in.
Fig. 37: Overlay - Cam Lock Location - Right Hand Fig. 38: Overlay-Cam Lock Location - Left Hand
Fig. 39: Detach Cam Lock Assembly
Fig. 40: Re-assemble and Re-install Cam Lock