Mac Medical D Series, Установка, эксплуатация и обслуживание

Страница: 40 / 48

Instruction Manual
MAN-001
40
www.macmedical.com
8. Look at the socket located on both the top and bottom of the door
(circled in red in Fig. 66). The pins of the door hinges will insert into these.
Fit the bottom socket of the door onto the bottom hinge pin. Support
the door on its bottom hinge while you prepare to affix the door to the
top hinge.
9. Insert the screws into the top hinge (or intermediate hinge, if
applicable). Then insert the hinge pin into the top socket of the door,
aligning the hinge screws with the top (or intermediate) hinge holes on
the unit as shown in Fig. 67.
10. From the side of the unit, secure the door
and top hinge with the hinge nuts shown
circled in red in Fig. 67.
11. Square the door by checking its alignment with
the header (Fig. 68 shows a glass door, but the
same applies for the steel door). Then tighten
the hinge nuts.
12. Re-attach both side cabinet panels with its
screws
13. Re-insert the 2 interior cabinet screws near the
bottom of the cabinet chamber.
14. Re-attach the inner and outer top cabinet
plates.
Fig. 66: Door Hinge Socket
Fig. 67: Install Top Hinge and Secure Door
Fig. 68: Check Alignment - Square Door