Instruction Manual
MAN-001
39
www.macmedical.com
3. After the door is removed, unscrew the Door Handle and Cam
Lock Plate from their present position and move them to the
bottom of the door. Be sure to “mirror” the Cam Lock Plate
so that its top flange will be flush against the warming cabinet
when the door is re-installed in its new position (Fig. 63).
4. With the door handle and the cam lock plate transferred
to their new positions, rotate the door 180°. This will be its
orientation when re-installing the door on its new hinge position.
5.
From the opposite side of the cabinet, use a flathead
screwdriver to remove the 2 top satin plugs (Fig. 64) from the
top and the 2 lowest bottom satin plugs. These are the new
hinge positions.
6. Re-insert the 2 satin plugs (that were removed from the new
hinge positions) in the old hinge positions.
7. Attach the bottom hinge in the new position to the bottom
of the unit using the hardware provided (Fig. 65).
Fig. 63: Move Door Handle and Cam Lock Plate
Fig. 64: Remove Satin Plugs
Fig. 65: Install Bottom Hinge in New Position
Содержание D Series
Страница 41: ...Instruction Manual MAN 001 41 www macmedical com Wiring Diagram Single Chamber Warmers ...
Страница 42: ...Instruction Manual MAN 001 42 www macmedical com Wiring Diagram Dual Chamber Warmers ...
Страница 43: ...Instruction Manual MAN 001 43 www macmedical com Wiring Diagram Triple Chamber Warmers ...
