242
47DAC OPERATING MANUAL EM-9518-B Rev.4
36.4 PARAMETER MAP
Parameters, their settings and display order in each mode are as shown in the following figures.
The displays show default values, and depend on the specifications, input and settings.
36.4.1 OPERATION IN MEASURING MODE
■
DISPLAY AND RESET OF MAX/MIN VALUES, EXECUTION AND CANCEL OF FORCED ZERO/TARE ADJUSTMENT
• Lockout ‘LV0’ (unlock MAX/MIN display control, unlock Forced Zero and Tare Adjustment control)
• Lockout ‘LV1’ (lock MAX/MIN display reset, unlock Forced Zero control / lock Tare Adjustment control)
NOTE
The display reading type after power on can be changed to “MAX value” or “MIN value” with the display reading type set-
ting.
POWER ON
Present value
Measurement
stopped
To each mode
Executing/canceling Forced Zero/Tare Adjustment
Canceling Forced Zero
Executing Forced Zero
Executing Tare Adj.
for ≥ 2 sec.
for ≥ 1 sec.
Forced Zero
Tare Adj.
Canceling Tare Adj.
Displaying/resetting MAX/MIN values
Displaying MAX value
Displaying MIN value
*
Hold down
for ≥ 1 sec. to reset MAX/MIN values.
Measurement
started
POWER ON
Present value
Displaying MIN value
Displaying MAX value
Measurement
stopped
To each mode
Canceling Forced Zero
Executing Forced Zero
for ≥ 1 sec.
Forced Zero
Measurement
stopped
Measurement
started
Executing/canceling Forced Zero
Displaying MAX/MIN values