Chapter 2
_________________________________________________________________________________________
_________________________________________________________________________________________
BB6032-14
Photoacoustic Gas Monitor
LumaSense Technologies
1314i / 1412i / 1512 / 3434i
Page 43 of 81
2.3.33 REMOTE_DISPLAY_BUFFER
R_D_B?
reads out the contents of Remote display. The
output from the Monitor will be whatever has been
written into the buffer via the interface by the user.
R_D_B
reads new contents into Remote display buffer. The
data string is 80 characters long and must be
enclosed by double quotes(““).
2.3.34 RESET_COMMAND
*RST partially resets the Monitor. For details about resetting the Monitor,
see the Instruction Manual.
2.3.35 RESET_STATUS_BYTE
R_S_B clears the Status byte, i.e. it is set to 00000000
2.3.36 RESET_SYSTEM
Warning! during a full reset of the Monitor, all data in the Display Memory
and Background Memory will be lost.
RESET_SY is followed by a parameter, which should be one of the following:
PARTial
The Monitor is partially reset.
FULl
The Monitor is fully reset.
If the parameter is omitted, the Monitor is partially reset.
/***** PROTECTED 71 *****/
Warning! during a factory reset of the Monitor, all data in the Source
Memory will be lost.
FActory
The Monitor makes a total E2PROM reset.
See the Instruction Manual for information on resetting the Monitor.
