Chapter 2
_________________________________________________________________________________________
_________________________________________________________________________________________
BB6032-14
Photoacoustic Gas Monitor
LumaSense Technologies
1314i / 1412i / 1512 / 3434i
Page 31 of 81
2.3.16 IDENTIFY?
ID? gives the identification of the instrument in this format:
LUMASENSE 1314
LUMASENSE 1412
or
LUMASENSE 1512
2.3.17 IDENTIFY? CONFIGURATION
ID? CON gives the identification of the instrument including its
configuration. The format is:
LUMASENSE 1512 5 REMOTE ANALOG 12
Where:
1512
is the gas monitor type
5
is the no. of gasses (1, 2 or 5)
REMOTE
is shown if the front panel is not present
ANALOG is shown if the UA1373 Analog interface module is installed
12
is the no. of 1409 channels and is shown if a 1409 is connected
A 1512-1 with an analog output module and a 1409-6 connected will
respond:
LUMASENSE 1512 1 ANALOG 6
2.3.18 IP Address
IP_ADDR x,x,x,x
set the Monitors IP address
(i.e. IP_ADDR 168,168,001,126)
IP_ADDR?
Reads out the Monitors IP Address
(i.e. 192.168.001.126)
2.3.19 IP Port
IP_PORT x
Sets the Monitors IP Port number (i.e. IP_ADDR 23)
IP_PORT?
Reads out the Monitors IP Port
