background image

MERLIN LEGEND Communications System Release 5.0
Feature Reference  

555-650-110  

Issue 1

June 1997

Features 

Page 610

Transfer 

Coverage

Calls transferred to a sender are eligible for Individual and/or Group 
Coverage. However, if the sender is using Coverage On/Off to prevent 
calls from going to coverage and does not have an available SA or ICOM 
button to receive a transferred call, the sender hears a call-waiting tone, 
even if an Individual or Group Coverage receiver is available.

Calls answered on a Primary Cover, Secondary Cover, or Group Cover 
button can be transferred using one-touch Transfer or the Transfer 
button.

Transfer returns are not eligible for Individual or Group Coverage.

CTI Link

CTI link applications can control inside transfers, not transfers to outside 
numbers. When a CTI application is used to initiate a transfer, caller 
information is passed to a screen-pop-capable destination.

When a transfer is initiated manually, using the telephone at an extension 
where a CTI application is installed, screen pop is not initiated at a 
screen-pop capable destination, even if the CTI application is used to 
complete the transfer.

When performed by a QCC operator or unmonitored DLC operator, a 
transfer generates screen pop of inside or outside caller information at 
screen-pop-capable destinations.

Digital Data Calls

Data calls cannot be transferred. 

2B data video calls require both B-channels at a video workstation. For 
this reason, if a call is on hold for transfer at a passive-bus MLX telephone 
when a 2B call arrives, the passive-bus MLX telephone cannot retrieve 
the held call until the 2B video call is over.

Direct Station 
Selector

DSS buttons can be used to transfer outside calls using one-touch Hold 
only by a DLC operator; a QCC operator cannot use this feature. When 
one-touch Hold is programmed, if a DLC operator presses a DSS button 
with an inside caller on the line or, in Hybrid/PBX mode, with an outside 
caller on an SA button, the call is not put on hold. A beep is sent to the 
extension instead.

When one-touch Transfer (with either automatic or manual completion) is 
programmed, and a system operator presses a DSS button while a caller 
is on the line and no SA or ICOM button is available to transfer the call, 
the call does not go on hold. If the operator hangs up, the caller is 
disconnected.

Direct Voice Mail

A user with a Direct Voice Mail button can activate Direct Voice Mail after 
starting to transfer a call. While a transfer is being made, press the Direct 
Voice Mail button to transfer the call to the extension’s voice mail. 
Complete the transfer as usual by pressing the Transfer button or 
hanging up.

Display 

When an MLX display telephone user presses the Transfer button, the 
display prompts the user to dial the extension number and shows the 
digits as they are dialed. When dialing is completed, the display shows 
the name of the person at the destination extension, if labels are 
programmed.

Содержание MERLIN LEGEND Release 5.0






































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы: