manualshive.com logo in svg

Lucent Technologies MERLIN LEGEND Release 5.0, Справочник по функциям

Поделиться
Скачать
Lucent Technologies MERLIN LEGEND Release 5.0 Скачать руководство пользователя страница 610

MERLIN LEGEND Communications System Release 5.0
Feature Reference  

555-650-110  

Issue 1

June 1997

Features 

Page 578

System Access/Intercom Buttons 

Mode Differences

3

9

Hybrid/PBX Mode

3

9

SA buttons, including Shared SA buttons, are available only in Hybrid/PBX mode.

Key and Behind Switch Modes

3

9

ICOM buttons are available only in Key and Behind Switch modes.

Telephone Differences

3

9

Direct-Line Consoles

3

9

Each DLC is assigned one SA Ring or ICOM Ring and one SA Voice or ICOM 
Voice button. Additional SA or ICOM buttons cannot be assigned to a DLC. This 
includes SSA buttons corresponding to SA buttons on other telephones. In 
addition, a DLC cannot be the principal extension for SSA buttons on other 
telephones.

Queued Call Consoles

3

9

A Queued Call Console (QCC), which uses Call buttons, cannot be assigned SA 
buttons, including SSA buttons. It cannot be assigned ICOM buttons because the 
QCC is available only in Hybrid/PBX mode.

Other Multiline Telephones

3

9

In Hybrid/PBX mode, each multiline telephone (except for DLCs) and 
Multi-Function Module (MFM) device is automatically assigned one SA Ring, one 
SA Voice, and one SA Originate Only button.

In Key and Behind Switch modes, each multiline telephone (including DLCs) and 
MFM device is automatically assigned one ICOM Ring and one ICOM Voice 
button.

Single-Line Telephones

3

9

In Hybrid/PBX mode, each single-line telephone (or other device connected to a 
016, 012, or 008 OPT module) is automatically assigned two SA Ring buttons 
and one SA Originate Only button.

In Key and Behind Switch modes, each single-line telephone (or other device 
connected to a 016, 012, or 008 OPT module) is automatically assigned two 
ICOM Ring buttons.

In releases prior to 4.0, the default assignment of SA or ICOM buttons to 
single-line telephones is fixed and cannot be changed—no SA or ICOM buttons 
can be removed or added. In Release 4.0 and later systems, the default 

Содержание MERLIN LEGEND Release 5.0






































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды