Lucent Technologies CentreVu Supervisor, Руководство по установке и началу работы

Страница: 25 / 306

CentreVu Supervisor Version 8 Installation and Getting Started
Introduction
Installation Support
1-7
Installation Support
1
If you have difficulty installing CentreVu Supervisor, refer to the following
sources:
●
System requirements in “What You Need on Your PC” on page 1-10 .
●
The online Help option provided with the installation program. (See
“Online Help” on page 1-8 .)
●
The tips in the readme.txt file on the CD-ROM. Use an editor such as
Microsoft Windows Notepad to read the file.
●
The Install Status dialog box will display a list of all files installed for
CentreVu Supervisor Release 8. Review this list to see that all files were
successfully installed.
●
Chapter 9, “Troubleshooting.”
If you have further questions, contact the Lucent Technologies National
Customer Care Center on 1-800-242-2121. For international support, call your
Lucent representative or distributor for assistance.
Tips
1
The CD-ROM in your package includes a graphical installer to help you install
your copy of CentreVu Supervisor.
The CD-ROM also supports the Microsoft Windows AutoPlay feature. If
AutoPlay is enabled on the PC, insert the CD-ROM into the drive and the
CentreVu Supervisor Setup program starts automatically.
NOTE:
See your system administrator for information on how to enable or disable
AutoPlay on your PC.
You can cancel the installation of CentreVu Supervisor at any time by selecting
“Close” from the control menu, pressing Alt+F4, or pressing the F3 key. You
can also cancel the installation by selecting the Cancel button at the bottom of
the screen. The Supervisor installation program will exit installation and
remove any files that were built by the program.