Lucent Technologies CentreVu Supervisor, Руководство по установке и началу работы

Страница: 195 / 306

CentreVu Supervisor Version 8 Installation and Getting Started
Using CentreVu Supervisor Reports
Setting Report Threshold Highlights
7-57
NOTE:
Report threshold highlights are not the same as CMS Exceptions Thresholds.
The threshold highlighting you can do with this feature is available through the
Supervisor interface only.
To set report threshold highlights do the following steps:
1. Run a report that contains real-time data (a real-time or integrated report)
2. Select on a data item in the report for which you can set threshold
highlights
NOTE:
When a data item/items for which threshold highlights can be set is
selected, the Threshold Settings menu item is enabled. When the data item
that is selected does not allow thresholds, an error message will display.
See the tables later in this section for a list of the report outputs that allow
threshold highlighting.
3. Select Threshold Settings from the right mouse button or from the Tools
menu.