Lucent Technologies CentreVu Supervisor, Руководство по установке и началу работы

Страница: 244 / 306

CentreVu Supervisor Version 8 Installation and Getting Started
Installing and Using CentreVu Terminal Emulator
Using Terminal
8-20
●
Data Bit—choose the number of data bits from the pull-down list.
The options are 5, 6, 7, and 8.
●
Stop Bits—displays the number of stop bits from the pull-down list.
The options are 1, 1.5, and 2.
NOTE:
Do not change these settings unless you are instructed to do so by your
Network Administrator.
Modem Tab
8
Select the Modem tab to set up or change dial strings for connecting to the
remote CMS through a modem port. Below is an example of standard modem
settings for Terminal:
Use the following information to set up the modem connection:
●
Phone Number—enter the phone number of the remote host.
●
Dial Prefix—enter the characters to send to the modem before the Phone
Number of the remote host. For example, if a “9” must be dialed before the
telephone number, you can enter it after the phrase ATDT (ATDT9).