Beta Draft Confidential
Sybase Prerequisite Tasks
Partitioning the Disk(s) to be Used for Sybase Using Raw Partitions
B-STDX, CBX, and GX Network Management Station Installation Guide
7/12/04
3-5
4.
At the
format
prompt, enter
partition
.
The Partition Menu appears (
Figure 3-2
).
Figure 3-2.
Partition Menu
Defining Partitions 1 and 7
Perform the following steps to define the partition.
1.
At the
partition
prompt, enter
1
.
2.
At the
Enter partition id tag prompt
, enter
unassigned
.
3.
At the
Enter partition permission flags
prompt, enter
wm
.
4.
At the
Enter new starting cyl
prompt, enter
0
.
5.
At the
Enter partition size
prompt, enter
0mb
.
6.
When you finish defining partitions 1 and 7, at the
partition
prompt, enter
. The partition table appears.
Do not make
changes to partition 2 if it uses
the entire disk.
Note –
Repeat
step 1
through
step 5
for partition 7. (For
step 1
, enter
7
instead of 1.)
