Beta Draft Confidential
Installing NavisCore
Defining a Static Route to the NMS
B-STDX, CBX, and GX Network Management Station Installation Guide
7/12/04
6-11
Defining a Static Route to the NMS
To communicate with your network and manage your switches, you must add a static
route from your NMS to your gateway switch.
Figure 6-5
shows a sample static route
connection. When you first create the Map, the default internal network address
(152.148.0.0) is displayed.
•
This section assumes you have already installed the gateway switch. See the
appropriate manual (
B-STDX 8000/9000 Multiservice WAN Switch Hardware
Installation Guide
,
CBX 500 Multiservice WAN Switch Hardware Installation
Guide
, or
GX 550 Multiservice WAN Switch Hardware Installation Guide
).
Figure 6-5.
Static Route Connection Example
Note –
If you use Routing Information Protocol (RIP) to communicate with your
network, you do not have to define a Static Route to the NMS. For more information
on RIP, see the
B-STDX and CBX IP Services Configuration Guide.
Network
152.148.0.0
152.148.0.2
152.148.0.3
152.148.0.1
152.148.51.31
Gateway
152.148.51.0
152.148.51.194
NMS
