Beta Draft Confidential
Overview
NMS Software Requirements
B-STDX, CBX, and GX Network Management Station Installation Guide
7/12/04
1-7
Solaris 8 Patch Cluster
Before you install the NMS software programs, you must obtain the file
8_Recommended.zip
. Additional Solaris 8 patch(es) may also be needed.
To obtain the patch(es), do one of the following:
•
Contact Sun at 1-800-USA-4SUN.
Access these files from Sun MicroSystems’ SunSolve Web site at
http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access
.
After you install the Solaris 8 operating system, you need to install the patch cluster.
Sybase 12.5.0.1
Sybase Adaptive Server Enterprise (ASE) 12.5.0.1, which will be referred to simply
as Sybase 12.5.0.1 in this guide, is a relational database software program used to
store database information and provide backup and recovery of database files.
Open Client 12.5
Open Client 12.5 is a programming interface that allows transparent access to any data
source, information application, or system service.
HP OpenView 6.2
HP OpenView Network Node Manager (NNM) 6.2, which will be referred to simply
as HP OpenView 6.2 in this guide, is a graphical Simple Network Management
Protocol (SNMP) management application that provides fault, configuration, and
performance management for multivendor Transmission Control Protocol/Internet
Protocol (TCP/IP) networks. In addition, HP OpenView 6.2:
•
Manages custom SNMP devices and objects
•
Performs trap formatting and actions
•
Performs remote diagnostics and automatic status propagation
Note –
For additional Lucent-recommended Solaris patch(es), see the
Software
Release Notice for NavisCore Release 09.00.00.00
.
Note –
For details on the Lucent-recommended Sybase 12.5.0.1 patches, see the
Software Release Notice for Sybase 12.5.0.1
.
