LSIS LSLV0055H100-4COFN Скачать руководство пользователя страница 77

Страница: 77 / 610

Learning to Perform

Basic Operations

3.2.5 Navigating through the Codes (Functions)

Code Navigation in Monitor mode

The display items in Monitor mode are available only when the inverter is in AUTO mode. In

Monitor mode, press the [Up] or [Down] key to move the cursor up or down. Different values,

such as the operating frequency, the output current, or voltage are displayed according to

the cursor position. The cursor does not move up or down in HAND mode or in OFF mode.

•

In AUTO mode, the cursor appears to the left of the

frequency information.

•

Press the [Down] key.

•

Information about the second item in Monitor mode

(Output Current) is displayed.

•

Wait for 2 seconds until the information on the display

disappears.

•

Information about the second item in Monitor mode

(Output Current) disappears and the cursor

reappears to the left of the second item.

•

Press the [Down] key.

•

Information about the third item in Monitor mode

(Output Voltage) is displayed.

•

Wait for 2 seconds until the information on the display

disappears.

•

Information about the third item in Monitor mode

(Output Voltage) disappears and the cursor appears

to the left of the third item.

•

Press the [Up] key twice.

Содержание LSLV0055H100-4COFN



































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание LSLV0055H100-4COFN

Отзывы:

Бренды по названию

Популярные бренды

LSIS LSLV0055H100-4COFN, Руководство пользователя

Результаты поиска

Содержание LSLV0055H100-4COFN

Отзывы:

Бренды по названию

Популярные бренды