LSIS LSLV0055H100-4COFN Скачать руководство пользователя

Страница: 80 / 610

Learning to Perform

Basic Operations

•

Press the [PROG/ENT] key to save the selection.

•

The setting is saved and the code is displayed

again.

•

Press the ESC key to go back to the initial code of

the Drive group (DRV-00).

3.2.7 Parameter Settings available in Monitor Mode

The H100 inverter allows basic parameters, such as the frequency reference, to be

modified in Monitor mode. When the inverter is in Hand or OFF mode, the frequency

reference can be entered directly from the monitor screen. When the inverter is in AUTO

mode, press the [PROG/ENT] key to access the input screen for a frequency reference.

Parameter setting in HAND/OFF mode

•

Ensure that the cursor is at the frequency reference

item. If not, move the cursor to the frequency

reference item.

•

When the cursor is at the frequency reference item,

detailed information is displayed and the cursor

flashes at the input line. A flashing cursor indicates

that it is waiting for user input.

•

Press the [Left] or [Right] key to change places.

Содержание LSLV0055H100-4COFN



































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание LSLV0055H100-4COFN

Отзывы:

Похожие инструкции для LSLV0055H100-4COFN

Бренды по названию

Популярные бренды

LSIS LSLV0055H100-4COFN, Руководство пользователя

Результаты поиска

Содержание LSLV0055H100-4COFN

Отзывы:

Похожие инструкции для LSLV0055H100-4COFN

Бренды по названию

Популярные бренды